Hills SVL

DSP System Accessories

• 
  4L
  The XControl 4L is a standard NEMA 1G flush-mount panel with
  programmable controls for use with MediaMatrix audio
  processing products. The 4L can be configured for a large
  variety of uses. From basic control over audio levels to
  multiple channels of equalization control, the 4L is a
  perfect companion. Like the 4x4, the 4L’s rotary...
• 
  4S
  The XControl 4S is a standard NEMA 1G flush-mount panel with
  programmable controls for use with MediaMatrix audio
  processing products. The 4S can be configured for a large
  variety of uses. A simple music select panel, control for
  message playback or scene recall for use with
  MediaMatrix’s powerful preset functionality are just a few
  of the...
• 
  4x4
  The XControl 4X4 is a standard NEMA 2G flush-mount panel
  with programmable controls for use with MediaMatrix® audio
  processing products. The 4x4 can be configured to be
  anything from a simple volume control to a full-featured
  control panel for message playback, paging management or
  even as separate frequency levels for multiple equalization
  filters. Changing the configuration...
• 
  CAB4nD
  16 Channel Configurable Audio Bridge - Dante
  
  The CAB 4n features MediaMatrix's Scalable I/O Architecture,
  with support for the popular line of MediaMatrix I/O modules
  (up to four modules configurable for 16x0, 0x16, 12x4, 4x12
  or 8x8 operation). All inputs can be configured in groups of
  four channels for microphone or line level in any...
• 
  D1V
  *Digitool 4 Level Control Panel*
  
  The D1V is a programmable, flush mount level control panel
  designed for the Digitool. Designed for easy implementation,
  the D1V provides powerful, yet intuitive access to multiple
  audio levels within the Digitool software application. From
  simple volume to multizone level control, the D1V is
  designed to provide flexible audio control functionality.
  Changing...
• 
  D4S
  *Digitool 4 Switch Control Panel *
  
  
  
  The D4S is a programmable, flush mount button-based control
  panel designed for the Digitool. Designed for easy
  implementation, the D4S provides powerful, yet intuitive
  access to multiple controls within the Digitool software
  application.
  
  The D4S can be configured for a large variety of uses. A
  simple music select panel, zone...
• 
  Drag Net
  Drag Net is a Windows-based software application used to
  configure, control and monitor the RPM 88, RPM 44, RPM 22,
  RPM 2, RPM 2m and RPM 26z Programmable Multiprocessor family
  of fully configurable DSP based products and their remote
  controls. Drag Net features an intuitive drag-and-drop style
  user interface, with standard 10Base-T Ethernet connectivity
  for PC...
• 
  NIOGPIO25
  The NIOGPIO25 connects to the GPIO of a NION and provides a
  simple termination method to the GPIO port. A 91 cm
  male-to-female DB-25 cable is included for direct connection
  to the GPIO port of the nX32, N3, N6 or CAB 4n.  A 10 cm
  section of DIN rail is also provided for single-unit
  installations....
• 
  nTouch 180
  The nTouch 180 is a touch-screen controller for use with
  MediaMatrix NION. It features a 180mm (7") screen with a
  resistive touch overlay, allowing stylus or finger
  operation. The nTouch 180 utilizes an embedded version of
  the NWare:Kiosk software. This means that anything that can
  be designed with NWare can be controlled by the nTouch...
• nTouch180DS and nTouchIW
  The nTouch 180DS is a Multi-Mounting Stand for the nTouch
  180. Features a VESA-75 mount to attach to the nTouch 180
  and allows attachment to the wall. Can be set to any angle
  from 0 to 90 degrees.